TheMiserlyManager
11-09-2011, 12:49 PM
Hello again folks,
I'm back again with yet another handy dandy D.I.Y thread :Banane06: In this instalment of my on-going quest to make my Metro roadworthy once again, I'll establish the rudimentary steps in replacing the window regulator:
1) Remove the window.
2) Pull water deflector far enough away from door to gain access to the regulator retaining screws.
3) Remove retaining screws from the regulator.
4) Remove the regulator through the large opening in the door.
To install:
1) Apply multipurpose grease to all lubrication and sliding points.
2) Install regulator to door and secure with screws. Position water deflector back to its normal position.
3) Install the window.
http://www.gmpartseast.com/diagrams/large/15M/window-regulator-hardware-front-front-door-glass-su1003101.png
*diagram courtesy of gmpartsgiant.com (http://www.gmpartsgiant.com/); all rights reserved
I'm back again with yet another handy dandy D.I.Y thread :Banane06: In this instalment of my on-going quest to make my Metro roadworthy once again, I'll establish the rudimentary steps in replacing the window regulator:
1) Remove the window.
2) Pull water deflector far enough away from door to gain access to the regulator retaining screws.
3) Remove retaining screws from the regulator.
4) Remove the regulator through the large opening in the door.
To install:
1) Apply multipurpose grease to all lubrication and sliding points.
2) Install regulator to door and secure with screws. Position water deflector back to its normal position.
3) Install the window.
http://www.gmpartseast.com/diagrams/large/15M/window-regulator-hardware-front-front-door-glass-su1003101.png
*diagram courtesy of gmpartsgiant.com (http://www.gmpartsgiant.com/); all rights reserved